| APAR | H | Status | Corrected
APAR | PUT | Date
Added/Modified | Functional
Area | Abstract |
| PJ29650 | H | C | | | 4/7/2004 | POOLS | When GETFC has forced an implied wait, the VCT list is not serviced. |
| PJ28994 | | C | PJ27214 | 13 | 5/19/2004 | TPF INTERNET MAIL SERVER | Sending mail to an incorrect host name results in the mail message being put on the deferred queue instead of bounced back to the sender. |
| PJ29659 | H | C | PJ29437 | 18 | 3/31/2004 | MQS SUPPORT | With APAR PJ29437 applied, a CTL-3 system error dump out of CMQM (TPF MQSeries log processing) may result in an aborted TPF restart or aborted ZPSMS processor deactivation. |
| PJ29669 | | C | PJ27814 | 15 | 8/16/2004 | DASD | A CTL-63 may occur for CYED when IPLing the BSS from the prime mod and a subsystem from the LGF. |
| PJ29541 | | C | PJ25780 | 9 | 5/20/2004 | MQS SUPPORT | With APAR PJ25780 applied, a TPF MQSeries receiver channel may cause a long-running ECB (CTS7) if the channel is started after the channel sequence number is reset and there is no message activity on the channel. |
| PJ29470 | | C | PJ27028 | 12 | 9/8/2004 | FTP/TFTP | With APAR PJ27028 applied, an FTP client that displays a large directory may result in a CTL-4 from CFTP. |
| PJ28893 | | C | PJ25094 | 7 | 6/16/2004 | RECOVERY LOG SUPPORT | System hangs in restart because of RLOG recovery. |
| PJ29540 | | C | PJ28626 | 17 | 3/29/2004 | RECOUP | An error in APAR PJ28626 may cause a sequence error in ZRECP RERUN. |
| PJ29569 | | C | PJ25780 | 9 | 8/6/2004 | MQS SUPPORT | With PJ29579 applied, the value of am0cct is not correct on messages received via the TPF MQSeries ROUTC Bridge. |
| PJ29401 | | C | PJ25748 | 11 | 10/7/2004 | MISC | When doing a ZAPGM on NUCL at displacement FCC or FCD, or FCE or FCF, ZAPGM gets a CTL-4. |
| PJ29076 | | C | PJ27023 | 12 | 2/22/2005 | MQS SUPPORT | With APAR PJ27023 applied, the TPF MQSeries queue manager will remove nonpersistent memory messages that are in a commit scope on a ZMQSC STOP QMGR command. The active commit scopes will then fail with either a CTL-6D9, CTL-C13C, or CTL-3 at commit time. |
| PJ29614 | | C | PJ28649 | 17 | 4/13/2004 | VISUALAGE ASSEMBLER DEBUGGER | CTL-10 system error out of CUD1. |
| PJ29543 | | C | PJ27785 | 15 | 3/31/2004 | MPIF INITIALIZATION | MPIF 32-way loosely coupled processor migration (APAR PJ27785) may incorrectly convert #CB8HD records to #HDREC records causing CTL-2E dumps and incorrect information saved in the hardware record. |
| PJ29628 | | C | PJ29271 | 18 | 3/31/2004 | DATA BASE REORGANIZATION | DBR exceeds TDCTC limit, causing CTL-4A. |
| PJ29578 | | C | PJ27028 | 12 | 3/26/2004 | APACHE | The TPF FTP control session may be cleaned up by the socket sweeper during large file transfers. |
| PJ29484 | | C | PJ28195 | 16 | 4/7/2004 | TCP/IP NATIVE STACK | With TPF network services database (NSD) support (APAR PJ28195) applied, CTL-4 system errors may occur when sending output packets. |
| PJ29323 | | C | PJ27469 | 13 | 4/14/2004 | POOLS | Pool deactivation does not process chain blocks correctly. |
| PJ29649 | | C | PJ29513 | 18 | 4/14/2004 | 3270 LOCAL | With APAR PJ29513 applied, the TPF system may encounter OPR-I0045F dumps. This APAR corrects APAR PJ29513. |
| PJ29394 | | C | PJ27023 | 12 | 4/7/2004 | MQS SUPPORT | With APAR PJ27023 applied, ZPSMS PROC FORCE DEACT fails with CTL-8 if the TPF MQSeries QMGR is not defined. |
| PJ29485 | | C | PJ25781 | 9 | 3/31/2004 | CF RESTART | A CTL-1 dump is taken immediately after CP RESTART MSGPROC is entered to restart a coupling facility. |
| PJ29679 | | C | PJ28901 | 18 | 4/20/2004 | TCP/IP NATIVE STACK | Possible data corruption in CTSC caused by APAR PJ28901 and in CTTO by APAR PJ28659. |
| PJ29676 | | C | PJ28064 | 15 | 6/4/2004 | OSA-EXPRESS SUPPORT FOR TPF | With OSA-Express polling enhancement applied (APAR PJ28064), locking problems can occur in TPF clock processing. |
| PJ29592 | | C | PJ28649 | 17 | 11/24/2004 | DEBUG TOOL SUPPORT | Confusion with VATPF debugger when tracing child ECBs. |
| PJ29594 | | C | PJ25632 | 9 | 4/14/2004 | DEBUG TOOL SUPPORT | Debugger CTL-4 system error occurs while monitoring the local function. |
| PJ29710 | | C | PJ26707 | 11 | 8/24/2004 | LOCK MANAGEMENT | CTL-4611 dumps may needlessly occur during LEMIC processing. |
| PJ29719 | H | C | PJ21907 | 5 | 4/22/2004 | SYSTEM ERROR AND RECOVERY | As a result of APAR PJ21907, C stack corruption may cause CPSE to corrupt the control program and, eventually, cause a CTL-1 dump. |
| PJ29711 | | C | PJ25781 | 9 | 4/20/2004 | CF MESSAGE ROUTINES | With APAR PJ25781, CF operations may not be restarted correctly. |
| PJ29718 | | C | PJ26707 | 11 | 4/14/2004 | LOCK MANAGEMENT | A SNAP-63 dump may occur on a ZCFLK MIGRATE. |
| PJ29572 | H | C | | | 6/16/2004 | DASD | Improper serialization between path-not-operational recovery and connect path recovery may cause a module-down condition. |
| PJ29624 | | C | PJ28758 | 17 | 5/14/2004 | MQS SUPPORT | With APAR PJ28758 applied, trigger information for a local queue may contain unpredictable values after ZMQSC ALTER QLOCAL is entered. |
| PJ29742 | | C | PJ25632 | 9 | 5/26/2004 | SYSTEM TASK DISPATCHER (CPU LOOP) | TMSLC segment CTMS performs TSNT (Time Slice Name Table) rebuild incorrectly. |
| PJ29601 | | C | PJ25780 | 9 | 8/3/2004 | MQS SUPPORT | With TPF MQSeries APAR PJ25780 applied, a CTL-749 may occur from various ZMQSC channel commands when TPF is running in block check mode. |
| PJ29618 | | C | PJ26707 | 11 | 3/29/2004 | LOCK MANAGEMENT | With APAR PJ26707 applied, a CTL-4611 dump may be issued on a ZDLCK DISPLAY MOD command. |
| PJ28557 | | C | PJ27785 | 15 | 12/16/2004 | CAPTURE/RESTORE | Multiple segments have code that extends beyond column 72. |
| PJ29729 | | C | | | 6/3/2004 | ISO-C SUPPORT | CTL-4 corrupts CE1PBI. |
| PJ29728 | | C | PJ27383 | 13 | 4/14/2004 | PERFORMANCE ANALYZER | CTL-1 catastrophic dump occurs when using the performance analyzer. |
| PJ29634 | | C | PJ28422 | 17 | 3/29/2004 | TCP/IP NATIVE STACK | With APAR PJ28422 applied, the ZTTCP ACT ALL command could fail to activate all of the CDLC links defined. |
| PJ29696 | | C | PJ26686 | 11 | 4/14/2004 | FILE COPY | CTL-8 system error occurs on CYPE when ZMCPY PAUSE is entered during copy start. |
| PJ29615 | | C | PJ28649 | 17 | 4/14/2004 | DEBUG TOOL SUPPORT | CTL-4 dumps occur while debugging in certain stack transition points. |
| PJ29635 | | C | PJ27785 | 15 | 4/7/2004 | RECOUP | BRV0 pseudo directory initialization may time out without an error message. |
| PJ29636 | | C | PJ29062 | 17 | 5/19/2004 | MQS SUPPORT | With APAR PJ29062 applied, a CTL-749 dump may occur from CNAB when deactivating a processor with block checking mode on; and with APAR PJ29437 applied, a CTL-10 dump from CUIU may occur during processor deactivation or when a message is rolled back from a processor-shared queue. |
| PJ29689 | | C | PJ25094 | 7 | 6/4/2004 | DASD | With APAR PJ25094 applied, possible CTL-38 dumps may occur because of a redrive of non-hold IOBs with a cached unlock. |
| PJ29451 | | C | PJ28591 | 17 | 3/26/2004 | OSA-EXPRESS SUPPORT FOR TPF | If the CE1CPD field does not contain the processor ID of the local processor, unpredictable behavior can occur. |
| PJ29727 | | C | PJ27905 | 15 | 5/7/2004 | VISUALAGE ASSEMBLER DEBUGGER | TPFSYM returns SYSADATA FILE POSITION ERROR when processing DC with 0 duplication. |
| PJ29358 | | C | PJ26707 | 11 | 4/16/2004 | LOCK MANAGEMENT | Upgrade the coupling facility (CF) TPF lock distribution algorithm for prime/dupe module pairing. |
| PJ29716 | | C | PJ29024 | 18 | 4/20/2004 | TAPE API SUPPORT | With APAR PJ29024 applied, the tourc() tape function is mapped incorrectly to the tape_read() function. When a call is made to the tourc() function, an OPR-I000074 dump occurs.
Additionally, some errors were found in include/c_soap.h because comments were not closed or were not closed correctly. |
| PJ29616 | | C | PJ27848 | 15 | 3/29/2004 | RECOUP | A CTL-3 dump may occur if ZRECP PROCEED is entered while ZRECP NOREBUILD is in progress. |
| PJ29570 | | C | PJ29282 | 18 | 5/7/2004 | VISUALAGE ASSEMBLER DEBUGGER | CTL-2 dumps occur while debugging a selectively activated ECB. |
| PJ29708 | | C | PJ28622 | 17 | 4/7/2004 | 3270 LOCAL | With APAR PJ28622 applied in a 3270 local console environment, attempts to manually replace the PRC back to line 01 erroneously results in error "ACRS0070E REP CONSOLE TYPE DISAGREES WITH CONFIGURED TYPE." |
| PJ29673 | | C | PJ26161 | 10 | 2/25/2005 | MATIP | With APAR PJ26161 applied, control and data blocks for various MATIP session types are not processed correctly. |
| PJ29702 | | C | PJ27785 | 15 | 5/14/2004 | IPL | Error message IPLA0055W always is displayed when IPLing from the loader general file. |
| PJ29607 | | C | PJ28195 | 16 | 5/27/2004 | DATA REDUCTION | Application port numbers higher than 32767 do not display correctly in NSD reports. |
| PJ29375 | | C | PJ25780 | 9 | 5/26/2004 | MQS SUPPORT | TPF MQSeries QMGR erroneously starts following ZCYCL from 1052 to CRAS or MESW state. |
| PJ29496 | H | C | | | 5/27/2004 | TCP/IP NATIVE STACK | With APAR PJ28901 applied, CPU degradation can occur with sockets using activate on receipt (AOR). |
| PJ29059 | | C | PJ25098 | 7 | 6/28/2004 | TPFCS ZBROW ROUTINES | TPFCS will automatically attempt to fix a corrupted master control record when found by updating an existing record with valid data. This can cause more corruption if another application is still using this record. |
| PJ29229 | H | C | | | 4/29/2004 | COMMIT/ROLLBACK SUPPORT | System may get into C13C catastrophic dump loop if a transaction is committed, but cannot be hardened to the file. |
| PJ29623 | | C | PJ24609 | 9 | 3/26/2004 | ENTER/BACK PROCESSING | With APAR PJ24609 applied, ECBs exiting because of a CTL-8 system error may contain misleading diagnostic information. |
| PJ29418 | | C | PJ27023 | 12 | 11/23/2004 | MQS SUPPORT | With APAR PJ27023 applied, MQSeries APIs executed while the application ECB can be suspended by LODIC may cause MQSeries to hang with queue locks outstanding. This may cause the recovery log to fill and result in a catastrophic CTL-C117. |
| PJ29658 | H | C | PJ25780 | 9 | 5/11/2004 | MQS SUPPORT | With APAR PJ25780 applied, if the TPF system is below the CREMC shutdown level, an ECB can be suspended with an MQSeries transmission queue locked, eventually causing a CTL-C117 or CTL-000C system error. |
| PJ29625 | | C | PJ28435 | 16 | 4/16/2004 | MQS SUPPORT | With APAR PJ28435 applied, TPF MQSeries does not handle mixed case names when processing a ZMQSC DISPLAY command using a wildcard entry. |
| PJ29477 | | C | PJ25780 | 9 | 2/25/2005 | MQS SUPPORT | TPF MQSeries support for stopping all channels with ZMQSC STOP CHL-ALL takes too long and does not disable all Receiver channels. |
| PJ29695 | | C | PJ28870 | 17 | 5/24/2004 | SYSTEM TASK DISPATCHER (CPU LOOP) | Routine CPMTASD corrupts the CPU loop switch base. |
| PJ29379 | | C | PJ25094 | 7 | 12/7/2004 | LOCK MANAGEMENT | A CTL-38 cached unlock failure may occur after a CTL-3A dump. |
| PJ29596 | | C | PJ26188 | 10 | 3/26/2004 | FILE SYSTEM SUPPORT | With APAR PJ26188 applied, CFIN does not set CINFC tag CMMSHMM address in a non-basic subsystem (non-BSS). |
| PJ29633 | | C | PJ28097 | 15 | 5/27/2004 | RECOUP | Segment BPDH incorrectly stores deactivated ID counts. |
| PJ29690 | | C | PJ21313 | 4 | 3/29/2004 | RECORD CACHE SUBSYSTEM | A CTL-3 dump from segment CACA may result from the ZBUFC FILE ALL command. |
| PJ29713 | | C | PJ26707 | 11 | 12/21/2004 | LOCK MANAGEMENT | Enhance the user exit code in CF locking support. |
| PJ29632 | | C | PJ27865 | 14 | 6/17/2004 | TPF INTERNET MAIL SERVER | CTL-3 occurs out of CMN1 on ZMAIL START. |
| PJ29637 | | C | PJ29313 | 18 | 3/29/2004 | CCP ERROR | With APAR PJ29313 applied, ZLAEC ALL may not clear the line and TI error counts correctly. |
| PJ29547 | | C | PJ29191 | 18 | 4/13/2004 | MQS SUPPORT | If a TPF MQSeries queue contains only messages that have expired and an application attempts to get a message from that queue, the queue empty trigger will not be set even though the application receives a return code indicating that there were no messages on the queue. |
| PJ29606 | | C | PJ24530 | 6 | 4/7/2004 | VIRTUAL STORAGE SERVICES | A CTL-2 system error might occur instead of a CTL-6EE or CTL-6ED when the MOVEC macro is given an address that is not valid. |
| PJ29642 | | C | PJ26707 | 11 | 4/7/2004 | LOCK MANAGEMENT | With APAR PJ26707 applied, a CTL-0006C2 catastrophic system error may occur on Move Lock operations using a coupling facility (CF). |
| PJ29490 | | C | PJ28097 | 15 | 7/19/2004 | RECOUP | Correct detection of circular chain chases. |
| PJ29704 | | C | PJ28808 | 17 | 4/20/2004 | POOLS | With APAR PJ28808 applied, ZRPDU CREATE and ZDUPD S incorrectly have a higher priority than work from the network. |
| PJ29721 | | C | PJ25781 | 9 | 4/20/2004 | CF MESSAGE ROUTINES | A CTL-1 may occur during coupling facility request processing. |
| PJ29735 | | C | PJ28097 | 15 | 6/22/2004 | RECOUP | Offline multiple releases are not being calculated correctly. |
| PJ29752 | | C | PJ25981 | 10 | 5/7/2004 | SYSTEM TEST POST PROCESSOR | With APAR PJ25981 applied, debugger ECBs do not get formatted correctly in the dumps. |
| PJ29753 | | C | PJ29288 | 18 | 6/3/2004 | FILE SYSTEM SUPPORT | TFTP SNAPs occur on the first file transfer. |
| PJ29754 | | C | PJ29062 | 17 | 5/14/2004 | MQS SUPPORT | After applying APAR PJ29062, an MQGET function specifying the MQGMO_WAIT option may not return immediately when a message is added to the queue. A CTL-10 system error also may occur if separate applications are specifying MQGMO_WAIT, as well as MQMO_NONE and either MQMO_MATCH_MSG_ID or MQMO_MATCH_CORREL_ID, or both. |
| PJ29755 | | C | PJ27865 | 14 | 5/26/2004 | TPF INTERNET MAIL SERVER | Various TPF Internet Mail Server fixes. |
| PJ29757 | | C | PJ29083 | 18 | 4/23/2004 | FILE SYSTEM SUPPORT | APAR PJ29083 failed to list the CFID DLM in the APAR as needing to be link-edited. |
| PJ29763 | | C | PJ28422 | 17 | 5/26/2004 | OSA-EXPRESS SUPPORT FOR TPF | With APAR PJ28422 applied, the ZTTCP ACT IP command could fail to activate all of the CDLC links defined. |
| PJ29764 | | C | PJ27469 | 13 | 7/23/2004 | RECOUP | Global record timeout causes FACE error. |
| PJ29767 | | C | PJ26686 | 11 | 6/22/2004 | FIND/FILE MACRO SUPPORT | ECBs hang after multi-mod copy completion because of IOBs left on the delay queue. |
| PJ29770 | H | C | PJ27932 | 15 | 5/20/2004 | TCP/IP NATIVE STACK | cctcp1 ctl-1 |
| PJ29709 | | C | PJ25983 | 10 | 4/29/2004 | PERFORMANCE ANALYZER | CE3PAT always points to the base version of CPA0 during CPA0 termination. |
| PJ29781 | | C | PJ22641 | 5 | 6/4/2004 | SYSTEM ERROR AND RECOVERY | Dump processing may get hung when dumping static storage because CPSL is not using the bad ISO-C indicator set up by CPSE. |
| PJ29784 | | C | PJ28136 | 15 | 10/8/2004 | MQS SUPPORT | CTL-C dumps or other unpredictable results may occur when starting MQSeries queue manager for the first time after applying APAR PJ28136. CTL-C dumps also may occur on ZMQSC MIGRATE BEGIN, COMMIT, or FALLBACK when using PJ27023, PJ27858, or both. |
| PJ29785 | | C | PJ26707 | 11 | 7/19/2004 | LOCK MANAGEMENT | Lock contention notification processing when requesting locks that reside on the Coupling Facility may result in various system errors, including CTL-4627, CTL-4623, CTL-4604, or CTL-462B. |
| PJ29786 | | C | PJ25589 | 9 | 6/4/2004 | TCP/IP APPLICATION LAYER | With APAR PJ25589 applied, an OPR-7704 dump occurs because of a bad client socket. |
| PJ29738 | | C | PJ26707 | 11 | 5/19/2004 | LOCK MANAGEMENT | ZCFLK DISPLAY and ZCFLK MIGRATE command processing incorrectly counts the number of DASDs associated with a Coupling Facility (CF), leading to incorrect output displays or catastrophic system errors. |
| PJ29788 | | C | PJ28649 | 17 | 8/3/2004 | VISUALAGE ASSEMBLER DEBUGGER | Storage map view dumps or hangs when monitoring large amounts of storage. |
| PJ29789 | H | C | PJ29716 | 19 | 6/22/2004 | TAPE API SUPPORT | With APARs PJ29716 and PJ29024 applied, TPF MQSeries trace functions and TPF Data Collection fail with OPR-I00074 errors. |
| PJ29790 | | C | PJ29661 | 19 | 12/21/2004 | ISO-C SUPPORT | During TPF 4.1 SIP, an RC=4 occurred in ccenbk.asm. |
| PJ29793 | | C | PJ23359 | 6 | 12/9/2004 | OPZERO | Obsolete SERRC macro calls. |
| PJ29795 | | C | PJ28649 | 17 | 8/3/2004 | DEBUG TOOL SUPPORT | Debugger may not recognize that a C++ DLM segment has test hooks. |
| PJ29796 | | C | PJ25981 | 10 | 8/3/2004 | VISUALAGE ASSEMBLER DEBUGGER | Update the debugger connection to use the "connect" API as the source of the local IP address to resolve firewall/routing issues. |
| PJ29803 | H | C | | | 9/24/2004 | DASD | System outage due to loss of frames during ESS FlashCopy. |
| PJ29807 | | C | PJ27469 | 13 | 6/22/2004 | POOLS | Correct the FACS error path to issue a POSTC so the parent ECB does not time out and replace the CY2PCT pool count field with CY2XPCT. |
| PJ29808 | | C | PJ28901 | 18 | 10/7/2004 | TCP/IP NATIVE STACK | Update traffic limiting counters when using activate_on_receipt_of_TCP_message() and activate_on_receipt_of_TCP_message2(). |
| PJ29809 | | C | PJ29192 | 18 | 10/4/2004 | MQS SUPPORT | With APAR PJ29192 applied, stopping active TPF MQSeries RCVR and SVRCONN channels may result in a CTL-75. |
| PJ29811 | | C | PJ27095 | 12 | 8/24/2004 | TPFAR SQLAM SQL HANDLER | Continuous Data Collection may cause a CTL-10. |
| PJ29780 | H | C | PJ27865 | 14 | 5/27/2004 | TPF INTERNET MAIL SERVER | CTL-2E dump can occur out of CMN3. |
| PJ29817 | | C | PJ28649 | 17 | 10/8/2004 | DEBUG TOOL SUPPORT | Fix various performance issues with the debugger for large C/C++ programs. |
| PJ29819 | | C | PJ28649 | 17 | 8/3/2004 | DEBUG TOOL SUPPORT | Correct a CTL-4 error that may occur when debugging a 24-bit file resident program. |
| PJ29822 | | C | PJ25375 | 8 | 6/28/2004 | TCP/IP APPLICATION LAYER | gethostbyname should accept NULL arg without dumping. |
| PJ29828 | | C | PJ28195 | 16 | 12/20/2004 | TCP/IP NATIVE STACK | Unnecessary unlkc and maskc macro calls at the beginning of getservbyname and getservbyport may cause a CTL-3 when TPF is running without TCP/IP native stack. |
| PJ29829 | | C | PJ28526 | 17 | 7/1/2004 | TCP/IP NATIVE STACK | CTL-3 in CTFF |
| PJ29830 | | C | PJ29437 | 18 | 6/28/2004 | MQS SUPPORT | With APAR PJ29437 applied, a blank screen may be displayed when entering the ZMQSC DISPLAY QL command from a remote 3270 terminal. |
| PJ29611 | | C | PJ28901 | 18 | 6/18/2004 | TCP/IP NATIVE STACK | With APAR PJ28901 applied, a CTL-1 dump occurs in CCTCP1. |
| PJ29844 | | C | PJ28649 | 17 | 8/3/2004 | DEBUG TOOL SUPPORT | Allow the debugger to allocate heap storage beyond the MMHS parameter setting. |
| PJ29847 | | C | PJ26161 | 10 | 12/20/2004 | MATIP | With APAR PJ26161 applied, a CTL-4 system error and system heap corruption occurs during MATIP processing. |
| PJ29848 | | C | PJ26161 | 10 | 7/23/2004 | MATIP | With APAR PJ26161 applied, a CTL-3 system error can occur if MATIP receives fewer than 4 bytes on an activate_on_receipt_with_length () function. |
| PJ29850 | | C | PJ27469 | 13 | 9/15/2004 | SYSTEM ALLOCATOR | A corequisite TPF APAR is needed for TPFDF APAR PQ85997 to allow TPFDF to call TPF segment B1AF instead of function VFile_Keypoint in segment BGAJ to checkpoint the recoup keypoint. |
| PJ29858 | | C | PJ28649 | 17 | 8/3/2004 | DEBUG TOOL SUPPORT | Snap-I000ADB05 can occur while tracing a TPFDF dump. |
| PJ29863 | | C | PJ29216 | 18 | 10/4/2004 | COMM SOURCE | OPR-I0210F1 occurs from WGRA after APAR PJ29216 is applied. This APAR corrects APAR PJ29216. |
| PJ29864 | H | C | PJ29804 | 19 | 8/3/2004 | COMMIT/ROLLBACK SUPPORT | Incorrect USING statement causes a bad branch and a CTL-2 dump. |
| PJ29865 | H | C | PJ29593 | 19 | 8/16/2004 | SYSTEM INITIALIZATION PACKAGE | Some SIP instructions need to be added to spcomp.mac to complete APAR PJ29593. |
| PJ29867 | H | C | PJ27393 | 13 | 7/19/2004 | SYSTEM ERROR AND RECOVERY | A program check in cccpse may force the system to re-IPL when dumping corrupted data event control blocks (DECBs). This problem was caused by APAR PJ27393. |
| PJ29870 | H | C | PJ28893 | 19 | 9/1/2004 | RECOVERY LOG SUPPORT | System hangs during restart in log recovery. |
| PJ29871 | | C | PJ28649 | 17 | 9/10/2004 | ISO-C SUPPORT | With APAR PJ28649 applied and the ISO-C user exit code enabled, the fast link stack may get corrupted resulting in CTL-1 and CTL-4 system errors. |
| PJ29874 | | C | PJ28097 | 15 | 8/3/2004 | DATA ALTER AND DISPLAY | ZDFIL using MCHR format does not work when the requested module is down. |
| PJ29876 | | C | PJ28649 | 17 | 10/13/2004 | VISUALAGE ASSEMBLER DEBUGGER | Return code 4 from prelinker for modules CUDABS40 and CUD2BS40. |
| PJ29833 | | C | PJ27023 | 12 | 11/22/2004 | MQS SUPPORT | With APAR PJ27023 applied, the ZMQSC DISP QL command may show negative counts. |
| PJ29881 | | C | PJ26174 | 10 | 9/15/2004 | FILE SYSTEM SUPPORT | Modify ZFILE tail command to eliminate possible CTL-75 dumps and make more efficient use of memory. |
| PJ29885 | | C | PJ27785 | 15 | 8/27/2004 | LOCK MANAGEMENT | With APAR PJ27785 applied, a ZMCPY command may take a CTL-4 in CLME during start processing because of a processor timeout. |
| PJ29886 | | C | PJ27785 | 15 | 8/26/2004 | TOD CLOCK RPQ SUPPORT | Handling of returned TOD SYNC IPC messages is not correct. |
| PJ29888 | | C | PJ27469 | 13 | 8/16/2004 | RECOUP | Recoup may report lost addresses incorrectly. |
| PJ29889 | | C | PJ28836 | 17 | 10/27/2004 | SYSTEM ERROR AND RECOVERY | With PJ28836 applied, ECBs activated via FMMR sessions may not send correct notification to the originator when they are exited because of a system error. |
| PJ29891 | | C | PJ28649 | 17 | 10/7/2004 | VISUALAGE ASSEMBLER DEBUGGER | VisualAge debugger tracing of an unallocated program causes a loop. |
| PJ29894 | | C | PJ25094 | 7 | 9/22/2004 | IPL | CTL-38 dumps may occur when IPLing a processor that was force deactivated but failed because CTKI retrieval timed out. |
| PJ29895 | | C | PJ29788 | 19 | 8/24/2004 | VISUALAGE ASSEMBLER DEBUGGER | Debugger front end hangs when using storage mapping. |
| PJ29897 | | C | PJ27469 | 13 | 10/4/2004 | RECOUP | CTL-C dump may occur in segment BKC1 during Recoup Phase 5. |
| PJ29901 | | C | PJ27865 | 14 | 8/26/2004 | TPF INTERNET MAIL SERVER | Correct CTL-3 condition in CMN3. |
| PJ29902 | | C | PJ29328 | 19 | 8/27/2004 | LOCK MANAGEMENT | With APAR PJ29328 applied, incorrect comparisons are made in CLM2 and CSS6 for SSTHCLK. |
| PJ29905 | | C | PJ28789 | 19 | 8/24/2004 | LOCK MANAGEMENT | With APAR PJ28789 applied, CK9KC may not assemble with suffixes. |
| PJ29906 | | C | PJ27865 | 14 | 9/9/2004 | TPF INTERNET MAIL SERVER | Fix TPF Mail Server password encryption. |
| PJ29909 | | C | PJ26683 | 11 | 9/15/2004 | TCP/IP NATIVE STACK | Fix missing ICMP messages because of incorrect flag criteria check. |
| PJ29911 | | C | PJ26707 | 11 | 10/27/2004 | LOCK MANAGEMENT | If the TAPEQ and ICFLP macros are coded in the same program, assembly errors will occur. |
| PJ29915 | | C | PJ27469 | 13 | 12/10/2004 | RECOUP | Fix online recoup user exit at the end of recoup phase one. |
| PJ29918 | | C | PJ29062 | 17 | 10/13/2004 | MQS SUPPORT | With APAR PJ29062 applied, an MQGET with a GMO Version 1 may search the queue when it should not, or it may fail with an options error. Additionally, Java-based MQSeries clients fail to connect to TPF MQSeries. |
| PJ29919 | | C | PJ25880 | 10 | 12/20/2004 | LOADERS | With APAR PJ25880 applied, an erroneous OPR-I00C207 error may occur out of program CUPH. |
| PJ29920 | H | C | PJ27023 | 12 | 12/20/2004 | MQS SUPPORT | With APAR PJ27023 applied, a CTL-C117 catastrophic error may occur if the sender channel is locked for sending a large batch or sending a consistent stream of nonpersistent messages. A sequence number error may occur across an IPL for receiver channels. Checkpoint may cause unnecessary log usage when there is no MQSeries activity; and checkpoint time stamps need higher granularity for debugging purposes. |
| PJ29921 | | C | PJ25375 | 8 | 11/29/2004 | TCP/IP APPLICATION LAYER | The gethostbyname() API does not return any information if the response is not from the authoritative DNS server. |
| PJ29926 | | C | PJ29849 | 19 | 10/8/2004 | ISO-C SUPPORT | Add SPPGML changes for APAR PJ29849. |
| PJ29928 | | C | PJ25094 | 7 | 9/10/2004 | FIND/FILE MACRO SUPPORT | A FILUC of a delayed file record when a DECB is used may not be handled correctly. |
| PJ29931 | | C | PJ29638 | 19 | 10/7/2004 | TCP/IP NATIVE STACK | With APAR PJ29638 applied, a possible CTL-2 system error can occur when out of order data is received. |
| PJ29929 | H | C | PJ29447 | 18 | 10/27/2004 | TCP/IP NATIVE STACK | With PJ29447 applied, TPF may inadvertently assume that the remote has reduced the size of the TCP send window. |
| PJ29851 | | C | PJ27333 | 13 | 9/22/2004 | OSA-EXPRESS SUPPORT FOR TPF | Activation of the OSA-Express connection could fail when the port name defined is less than 8 characters. |
| PJ29883 | | C | PJ27865 | 14 | 8/30/2004 | TPF INTERNET MAIL SERVER | Extraneous semicolon in TPF Mail code. |
| PJ29884 | | C | PJ28435 | 16 | 2/10/2005 | MQS SUPPORT | With APAR PJ28435, the TPF MQSeries Channel Security exit for SVRCONN channels is not operational. |
| PJ29936 | H | C | PJ27530 | 14 | 10/20/2004 | SYSTEM ERROR AND RECOVERY | With APAR PJ27530 applied, system error processing will lose frames when dumping the TPFDF swap area. |
| PJ29939 | | C | PJ27469 | 13 | 9/17/2004 | RECOUP | An RECP0000T (IN CORE DIRECTORY CAPTURE TIME-OUT ON PROCESSOR) error may occur at the end of TPFDF recoup phase 1 when TPFDF is paused during the last record processed. |
| PJ29940 | | C | PJ26683 | 11 | 10/14/2004 | TCP/IP NATIVE STACK | ECB hangs in CTS2 when issuing a connect() API and the link associated with the socket is not active. |
| PJ29941 | | C | | | 11/9/2004 | TAPE MOUNT AND DISMOUNT, TAPE SWITCH | Cycle to NORM will leave the TPF system running in uniprocessor mode if record logging is active and all the necessary logging tapes are not mounted. |
| PJ29944 | H | C | PJ25094 | 7 | 9/29/2004 | RECOVERY LOG SUPPORT | An OPR-I00C130 dump can occur in cl31 when a large amount of data needs to be recovered by the DASD resource manager (RM). |
| PJ29945 | H | C | | | 12/3/2004 | DASD | Streaming CJIW0007W messages caused system outage. |
| PJ29946 | | C | PJ28901 | 18 | 9/29/2004 | TCP/IP NATIVE STACK | With APAR PJ28901 applied, an OPR-7704 dump can occur when BACKLOG is exceeded. |
| PJ29947 | H | C | PJ29675 | 19 | 9/24/2004 | DASD | ZXCPY FREEZE function of APAR PJ29675 can hang during periods of high I/O activity. |
| PJ29949 | | C | PJ26686 | 11 | 12/16/2004 | FIND/FILE MACRO SUPPORT | Verify all processors are active before copy end of job to prevent complex outage. |
| PJ29952 | | C | PJ28765 | 17 | 10/14/2004 | ISO-C SUPPORT | APAR PJ28765 causes CTL-4 and CTL-3 dumps (the exec() function). |
| PJ29955 | H | C | | | 2/18/2005 | FILE SYSTEM SUPPORT | The rate that TPF file system directory cache is accessed during ECB initialization of standard streams may cause a CTL-C "OUT OF 4K FRAMES" system error. |
| PJ29961 | | C | PJ28195 | 16 | 12/14/2004 | DATA REDUCTION | ONCODE=310 Fixed overflow in JRF4 when TCP/IP message counter wraps |
| PJ29962 | | C | PJ27393 | 13 | 11/29/2004 | ENTER/BACK PROCESSING | With DECB support (APAR PJ27393) applied, a CTL-1, CTL-2, CTL-3, or CTL-4 system error may occur during EXITC processing if a DECB frame has been corrupted. |
| PJ29967 | H | C | PJ27830 | 15 | 1/11/2005 | MQS SUPPORT | With APAR PJ27830 applied, starting an active TPF MQSeries Sender channel may result in one or more CTL-3 and CTL-4 errors, and core corruption. |
| PJ29975 | H | C | PJ17852 | 2 | 12/28/2004 | SYSTEM ERROR AND RECOVERY | A long dump may occur because of corrupted C static storage. |
| PJ29977 | | C | PJ29900 | 19 | 12/15/2004 | SYSTEM MESSAGE PROCESSOR (SMP) | With APAR PJ29900 applied, prefixed commands may be rejected. This APAR corrects APAR PJ29900. |
| PJ29979 | | C | PJ29585 | 18 | 10/12/2004 | VISUALAGE ASSEMBLER DEBUGGER | Fix expansion of expression for subrange. |
| PJ29981 | | C | PJ28649 | 17 | 1/24/2005 | VISUALAGE ASSEMBLER DEBUGGER | Assembler expressions restore from debug profile as deferred. |
| PJ29982 | | C | PJ27905 | 15 | 10/12/2004 | VISUALAGE ASSEMBLER DEBUGGER | Correct/Clarify PUT 17 Debugger Message EQA2015E. |
| PJ29985 | | C | PJ21044 | 4 | 11/9/2004 | SNA SYSTEM SERVICES | A CTL-571 system error may occur when a ZNDYN RECYCLE command is entered. |
| PJ29990 | | C | PJ29675 | 19 | 11/23/2004 | DASD External Copy Services | CTL-3 out of CXCV when defining more than 200 PPRC paths with PJ29675 applied. |
| PJ29988 | | C | PJ29675 | 19 | 1/5/2005 | DASD External Copy Services | CTL-38 caused by PPRC spare module handling introduced by APAR PJ29675. |
| PJ29792 | | C | PJ29024 | 18 | 10/12/2004 | VISUALAGE ASSEMBLER DEBUGGER | Correct the code that extends past column 72. |
| PJ29995 | | C | PJ27230 | 13 | 12/3/2004 | MQI CLIENT SUPPORT | With APAR PJ27230 applied, TPF MQSeries Client using MQGET with a WaitInterval greater than 5 seconds will fail with reason code 2009 (MQRC_BROKEN_CONNECTION). |
| PJ29997 | | C | PJ28712 | 18 | 11/12/2004 | DASD | With APAR PJ28712 applied, a failing module can be retried indefinitely. |
| PJ29996 | | C | PJ29675 | 19 | 1/17/2005 | DASD External Copy Services | With APAR PJ29675 applied, a CTL-6E3 error and FINWC loop can occur during ZXCFG CON RECEIVE processing. |
| PJ29999 | | C | PJ28496 | 17 | 11/9/2004 | TCP/IP APPLICATION LAYER | CINET4 CTL-572 dump for AOA process model from APAR PJ28496. |
| PJ30004 | | C | PJ29213 | 18 | 11/18/2004 | RECOUP | TPFDF recoup RCI processing does not work correctly. |
| PJ30007 | | C | PJ29616 | 19 | 11/22/2004 | RECOUP | Add recoup keypoint validation check to BREP. |
| PJ30014 | | C | PJ27469 | 13 | 11/22/2004 | RECOUP | Timeout error count field BK0ARC is not accurate during ZRECP SEL processing. |
| PJ30015 | | C | PJ26683 | 11 | 10/28/2004 | TCP/IP NATIVE STACK | Correct the ability to specify a fourth port in offline trace. |
| PJ30010 | | C | PJ25817 | 9 | 12/13/2004 | POOLS | CTL-2010 occurs during PDU processing. |
| PJ30018 | | C | PJ29229 | 19 | 11/5/2004 | COMMIT/ROLLBACK SUPPORT | With APAR PJ29229 applied, ZCORO INIT PROC command processing does not accept a numeric processor ID. |
| PJ30022 | | C | PJ29675 | 19 | 12/22/2004 | DASD External Copy Services | With APAR PJ29675 applied, ZXCPY START PATH command is rejected with XCPY0069E when source and target SDAs match. |
| PJ30023 | | C | PJ29675 | 19 | 2/21/2005 | DASD External Copy Services | APAR PJ29675 introduced the potential to incur a CTL-4 system error from Copy Services segment CXCQ. This would happen during restart when a remote copy had been executed previously. |
| PJ30028 | | C | PJ28649 | 17 | 11/12/2004 | VISUALAGE ASSEMBLER DEBUGGER | CTL-4 dump from CDB2 when debugging objects with no functions. |
| PJ30027 | | C | PJ26683 | 11 | 11/5/2004 | TCP/IP NATIVE STACK | Correct documentation for offline IP trace FILE parameter. |
| PJ30026 | | C | PJ25094 | 7 | 12/7/2004 | RECOVERY LOG SUPPORT | ZPSMS PR FORCE DEACT processing may hold keypoint record I (CTKI) too long and cause system outage. |
| PJ30031 | | C | PJ26008 | 10 | 12/21/2004 | DEBUG TOOL SUPPORT | CTL-1 error may occur if a system error occurs following debugger termination. |
| PJ30032 | | C | PJ27865 | 14 | 11/15/2004 | TPF INTERNET MAIL SERVER | IMAP getquotaroot command does not return OK response. |
| PJ30036 | | C | PJ28586 | 17 | 12/13/2004 | TCP/IP APPLICATION LAYER | Fix possible CTL-3 caused by APAR PJ28586 because of incorrect updating of user storage pointed to by the gethostbyname argument. |
| PJ30047 | | C | PJ28649 | 17 | 12/22/2004 | VISUALAGE ASSEMBLER DEBUGGER | Default constructors cause loading of debugging information to fail. |
| PJ30048 | | C | PJ27830 | 15 | 2/23/2005 | MQS SUPPORT | With APAR PJ27830 applied, the socket buffer size of the channel definition cannot be set to the default by TCP/IP; also, when CPU-ALL is specified in a ZMQSC ALTER CHL or ZMQSC DELETE CHL command, an MQSC0007E error may occur and the channel may not be altered or deleted from all processors. |
| PJ30049 | | C | PJ28435 | 16 | 3/2/2005 | MQS SUPPORT | With APAR PJ28435 applied, a CTL-E06 from CUSC may occur when ZMQSC STOP QMGR is entered. |
| PJ30050 | | C | PJ27469 | 13 | 2/11/2005 | RECOUP | CTL-54 could occur in an LC environment if two ECBs from two different I-streams are trying to open the RCP tape at the same time. |
| PJ30056 | | C | PJ28097 | 15 | 1/31/2005 | POOLS | CTL-4 dump in CFAI. |
| PJ30055 | | C | PJ27469 | 13 | 12/20/2004 | POOLS | When aborting PDU create, ZRPDU ABORT fails to set the PDU indicator in C50STA to inactive. |
| PJ30054 | | C | PJ23178 | 5 | 12/28/2004 | SYSTEM TASK DISPATCHER (CPU LOOP) | CTMT and CTMS incorrectly check return code from FACE. |
| PJ29440 | | C | PJ27865 | 14 | 11/23/2004 | TPF INTERNET MAIL SERVER | Various mail( ) API updates. |
| PJ30043 | | C | PJ26534 | 11 | 11/22/2004 | DATA ALTER AND DISPLAY | Order incorrect in ZDECB OLD display. |
| PJ29987 | | C | PJ27333 | 13 | 11/22/2004 | TCP/IP NATIVE STACK | With IP over CDLC support not defined, a CTL-1 can occur while searching the IP Routing Table. |
| PJ30059 | | C | PJ29328 | 19 | 12/1/2004 | LOCK MANAGEMENT | Lock management STACK macro may not work correctly. |
| PJ30060 | | C | PJ27469 | 13 | 12/1/2004 | RECOUP | TPFDF PACKINHI candidate records are not packed after the selective recoup of a TPF record. |
| PJ30064 | | C | PJ28649 | 17 | 2/22/2005 | VISUALAGE ASSEMBLER DEBUGGER | CTL-3 in CUD1 occurs with many functions in the program. |
| PJ30040 | H | C | PJ28789 | 19 | 12/1/2004 | LOCK MANAGEMENT | With APAR PJ28789 applied, a CTL-704 catastrophic condition may occur. |
| PJ30066 | | C | PJ28649 | 17 | 12/22/2004 | VISUALAGE ASSEMBLER DEBUGGER | Breakpoints are not restored from profile in source compiled in a PDS. |
| PJ29968 | | C | PJ29062 | 17 | 12/1/2004 | MQS SUPPORT | With APAR PJ29062 applied, if multiple ECBs specify MQGMO_WAIT and MQMO_MATCH_* at the same time, a CTL-6D9 or CTL-4 system error can occur. |
| PJ30061 | | C | PJ30024 | 19 | 12/3/2004 | TCP/IP NATIVE STACK | Build of ctie.c and csf4.c resulted in a warning message. |
| PJ29933 | | C | PJ27469 | 13 | 12/7/2004 | POOLS | Multiple DYDO0004I messages are displayed by the ZDUPD E command and ZDUPD S xx may log more than xx releases. |
| PJ30070 | H | C | | | 12/21/2004 | MPIF 3088 DEVICE SUPPORT | MPIF may return a lost interrupt using FICON CTC to a deactivated LPAR. |
| PJ30072 | | C | PJ28195 | 16 | 1/6/2005 | TCP/IP NATIVE STACK | connect() or bind() may return an incorrect port number (>5000) or take a CTL-4 dump when looking for the next available port number. |
| PJ30078 | | C | PJ27469 | 13 | 1/5/2005 | POOLS | Correct a CTL-21 during a pool reallocation run. |
| PJ30079 | | C | | | 12/14/2004 | BI-SYNCHRONOUS CONTROL (BSC) | A CTL-1 system error occurs out of copy segment CRMR in CSECT CCCCP5 when CRMR attempts to increment the bytes received data collection counter for a BSC station. |
| PJ30081 | | C | PJ28097 | 15 | 12/14/2004 | POOLS | Long-term pool reorder does not set the reorder-in-progress (CY1REO) bit in keypoint 9 correctly. |
| PJ30084 | H | C | PJ29440 | 19 | 3/2/2005 | TPF INTERNET MAIL SERVER | APAR PJ29780 was removed accidentally by APAR PJ29440. |
| PJ30085 | H | C | PJ29573 | 19 | 12/21/2004 | TOD CLOCK RPQ SUPPORT | After APAR PJ29573 is installed, a CTL-1 system error is taken when issuing a ZATIM command. |
| PJ30086 | | C | PJ17912 | 2 | 12/20/2004 | POOLS | The CINFC macro corrupts the short-term record base registers, causing random data to be used for short-term directory time stamps. |
| PJ30088 | | C | PJ21791 | 4 | 2/21/2005 | SOCKET CLIENT | With APAR PJ21791 applied, a CTL-572 system error occurs when a close() of a socket on one I-stream occurs as a select() is being issued for that socket on a different I-stream. |
| PJ30093 | | C | PJ28649 | 17 | 12/21/2004 | VISUALAGE ASSEMBLER DEBUGGER | Address breakpoints do not correctly restore from profile. |
| PJ30097 | | C | PJ27905 | 15 | 12/21/2004 | VISUALAGE ASSEMBLER DEBUGGER | CTL-4 from CDM2 when starting the debugger with an inactive loaded version of CUDA. |
| PJ30069 | | C | PJ29921 | 19 | 12/10/2004 | TCP/IP APPLICATION LAYER | With APAR PJ29921 applied, gethostbyaddr lookup cache hit may get a CTL-3 dump. |
| PJ30100 | H | C | | | 1/6/2005 | DASD | Database corruption may occur for records using processor locking when using ZMCPY UP. |
| PJ30109 | | C | PJ28622 | 17 | 3/22/2005 | CCP NUCLEUS AND COMMON ROUTINES | CTL-1 from CLYE in CCCCP1 after applying APAR PJ28622. |
| PJ30110 | | C | PJ27469 | 13 | 2/18/2005 | TPFDF RECOUP ROUTINES | Streaming timeouts during TPF to TPFDF crossover recoup. |
| PJ30113 | H | C | PJ26575 | 11 | 1/19/2005 | STORAGE BLOCK MANAGEMENT | With APAR PJ26575 applied, core corruption, a CTL-3, or other unpredictable results may occur when accessing ECB-unique storage areas. |
| PJ30116 | | C | PJ29024 | 18 | 2/9/2005 | 'C' LANGUAGE SUPPORT | APAR PJ29024 IDECIMA2 INLINE HEADER FILE LRECL GREATER THAN |
| PJ30118 | | C | PJ30044 | 19 | 2/2/2005 | VIRTUAL FILE ACCESS | With APAR PJ30044 applied, delay filing is not deactivated when cycling from NORM or MESW state to 1052 state. |
| PJ30119 | | C | PJ29657 | 19 | 2/8/2005 | DASD | APAR PJ29657 does not work in an MDBF environment. |
| PJ30122 | | C | PJ27469 | 13 | 3/22/2005 | POOLS | During ZPOOL GENERATION CREATE command processing, a CTL-3 may result from a bad branch in the FACS error path. |
| PJ30125 | | C | PJ27469 | 13 | 2/9/2005 | RECOUP | Correct CTL-C (Common Blocks) during tape write. |
| PJ30126 | H | C | PJ29967 | 19 | 1/28/2005 | MQS SUPPORT | With APAR PJ29967 applied, a disabled TPF MQSeries RECVR/SVRCONN channel cannot be started. |
| PJ30134 | | C | PJ28649 | 17 | 2/2/2005 | VISUALAGE ASSEMBLER DEBUGGER | PNL stack frames are not displayed. |
| PJ30132 | | C | PJ29497 | 18 | 2/4/2005 | RECOUP | OPR-IDB0115 may occur on ZRECP DISPLAY VERIFY command. |
| PJ30136 | | C | PJ29218 | 18 | 2/4/2005 | MACRO PROCESSING | Correct LREGSC single source macro for LOREG parameter. |
| PJ30137 | | C | PJ29925 | 19 | 3/15/2005 | CONTINUOUS DATA COLLECTION (CDC) | New tape header for CDC data needed. Cannot IPL from LGF. |
| PJ30139 | | C | PJ28649 | 17 | 2/28/2005 | VISUALAGE ASSEMBLER DEBUGGER | System hangs when tracing an exception taken from executing code on stack. |
| PJ30143 | | C | PJ30091 | 19 | 2/8/2005 | TCP/IP APPLICATION LAYER | With APAR PJ30091 applied, a CTL-3 may occur when INETD is started. |
| PJ30144 | | C | PJ25094 | 7 | 2/10/2005 | VIRTUAL FILE ACCESS | With APAR PJ25094, a CTL-704 catastrophic error may occur when issuing multiple FILEC general macros for the same file address when the record is a VFA synchronization immediate candidate and the FILEC macros are issued outside the realm of a suspended commit scope. |
| PJ30145 | | C | PJ26858 | 13 | 3/2/2005 | MATIP | With APAR PJ26858 applied, replies to input messages from ALC terminals are not received by the terminals. |
| PJ30147 | | C | PJ27469 | 13 | 2/21/2005 | RECOUP | Recoup should process only active SSUs. |
| PJ30149 | | C | PJ29640 | 19 | 2/22/2005 | ISO-C SUPPORT | To correct APAR PJ29640, change label ICST_WRK in the PRLGC macro from an equate symbol to a DS instruction. |
| PJ30151 | | C | PJ28154 | 19 | 2/18/2005 | SYSTEM ERROR AND RECOVERY | Assembly errors occur in CCCPSE and STPP after applying APAR PJ28154. |
| PJ30153 | | C | PJ29981 | 19 | 2/25/2005 | DEBUG TOOL SUPPORT | With APAR PJ29981 applied, assembler expressions can only be monitored with debug information. |
| PJ30158 | | C | PJ28789 | 19 | 2/25/2005 | LOCK MANAGEMENT | With APAR PJ28789 applied, purging a lock for an inactive processor may not function correctly. |
| PJ30159 | | C | PJ29213 | 18 | 3/17/2005 | TPF SUPPORT FOR TPFDF | Crossover recoup does not work with APAR PJ29213 applied. |
| PJ30161 | | C | PJ27333 | 13 | 2/21/2005 | SYSTEM ERROR AND RECOVERY | With APAR PJ27333 applied, a program check in CCCPSF may occur when SNA is not generated in the system. |
| PJ30167 | | C | PJ29950 | 19 | 3/17/2005 | 3270 LOCAL | Possible CTL-1 can occur after implementing APAR PJ29950. |
| PJ30169 | H | C | PJ29955 | 19 | 3/4/2005 | FILE SYSTEM SUPPORT | With APAR PJ29955 applied, the protect key is not restored correctly when issuing file system APIs and the standard streams may not be opened correctly. |
| PJ30177 | | C | PJ29381 | 18 | 3/15/2005 | 3270 LOCAL | A 3270 local terminal may hang after an unsolicited message has been sent when the terminal is not active. This problem was introduced by APAR PJ29381. |
| PJ30178 | | C | PJ29592 | 19 | 3/4/2005 | VISUALAGE ASSEMBLER DEBUGGER | DEBUGGER CTL-3 UPON AN APPLICATION FORK |
| PJ30179 | | C | PJ29077 | 18 | 3/3/2005 | TPF INTERNET MAIL SERVER | The TPF Internet Mail Server mailbox password needs to be folded to lowercase. |
| PJ30182 | | C | PJ28789 | 19 | 3/17/2005 | RECORD CACHE SUBSYSTEM | With APAR PJ28789 applied, an unnecessary read message I/O may be issued after a lock granted is simulated. |
| PJ30184 | | C | PJ27383 | 13 | 3/8/2005 | ENTER/BACK PROCESSING | With APAR PJ27383 applied, a 6DA dump may occur out of enter/back processing. |
| PJ30187 | | C | PJ29541 | 19 | 3/7/2005 | MQS SUPPORT | With APAR PJ29541 applied, resetting a remote Sender channel results in a TPF MQSeries receiver channel erroneously sending a response that results in a protocol violation. |
| PJ30211 | | C | PJ28649 | 17 | 3/23/2005 | DEBUG TOOL SUPPORT | Reduce memory usage of merged debugger and fix the disassembly view. |
| PJ30212 | H | C | PJ29955 | 19 | 3/22/2005 | FILE SYSTEM SUPPORT | With APAR PJ29955 applied, a CTL-3 dump in CTKO or a snap-EB dump may occur. |
| PJ30162 | | C | PJ27469 | 13 | 3/21/2005 | RECOUP | Recoup record ID initialization not completed before chain chasing. |
| PJ30223 | | C | PJ29925 | 19 | 3/30/2005 | SYSTEM ALLOCATOR | The entry for UF1T in SPPGML is incorrect. |
